Want To Prevent Leakage In Your Shower Enclosure? Read Ahead For Some Tips
Let us take a look at some common areas where leakages may occur after you have installed the bathroom shower enclosure. The first is the base. Even the slightest crack in the base may lead to seepage of water through the surface to the floor of the bathroom. However, you would not be in a position to identify the seepage unless you know that such a crack exists.
Normally, the shower enclosure is fitted right on the floor. The small gap is sufficient for water to seep and wreck havoc. The only option available is to lift the base and check the area underneath. A more convenient option is to fit the enclosure on a raised base so that you have a clear idea of the damage that has occurred underneath.
This may increase the cost. Another alternative is to raise the base by a few inches so that you step into the bathroom shower enclosure instead of walking into the same. This solution is also sufficient to overcome the problem.
If you have opted for a shower enclosure that does not have inbuilt accessories like soap bar shelf and ledges, then you may have to screw in the same separate Lee. Despite your best efforts, there is a possibility of the smallest gap being present when you have screwed the shelf or the accessories.
In such a scenario, you should use waterproof lubricant to seal the screw. Of course, you should opt for the right location so that you do not have to make unnecessary changes to the placement. However, make sure you use a strong adhesive that completely seals the water from seeping into the tiles through the gap.
Broken tiles are very common in bathrooms. However, you cannot afford to take the risk of having such a broken tile in your room when you have a shower enclosure fitted. Even though the tile is not situated very close to the enclosure, there is the possibility of water seepage damaging the entire room.
You must keep in mind that the enclosure will prevent you from accessing certain parts of the bathroom very quickly and efficiently. To avoid such complication, you should use preventive maintenance as the best approach.
Apart from these common areas, there is a possibility of additional areas becoming vulnerable. The best option is to keep an eye open for such problems on a regular basis.