Following a Basic Pool Cleaning Guide for example we have a pool maintenance company St Louis MO that will help you maintain a clean pool. You should be able to clean the water with a few simple steps. Here are some tips:
Using a tennis ball
While you may be surprised to hear that a tennis ball can help you keep your swimming pool clean, it is more than just a fun pool cleaner. The tennis ball is also great for absorbing oils commonly found in swimming pools, including sun lotion, hair products, and even your skin’s natural oils. By using it to scrub your pool, you will be able to remove all these unwanted substances.
Besides the obvious benefits of swimming pool cleaning, a tennis ball can also be a great filter. Because it absorbs surface oils from swimmers, it will reduce the amount of chlorine in your pool water. In addition to removing unsightly oil from the water, tennis balls are dishwasher-safe. Use a tennis ball to scrub the bottom of your pool, too. Again, the fuzzy exterior will help to eliminate the risk of bacteria building up.
Adding baking soda
If you’re concerned about acidic water in your swimming pool, adding baking soda to the water can be a helpful solution. By adding 1.5 pounds of baking soda per 10,000 gallons of water, you can boost the alkalinity of your pool by ten parts per million. The alkalinity level should be between 80 and 110 ppm. To increase alkalinity levels in your pool, use the basic pool cleaning guide.
Pool water naturally tends to be acidic as the seasons change, but using alkalizing agents will help preserve the safe pH level. A pool’s alkalinity (pH) level is measured through hydrogen absorption and produces neutral bicarbonate ions. The pH scale ranges from 0 to 14, with seven being neutral. To maintain the pH level in your pool, it’s important to use the right amount of baking soda and monitor the results periodically.
Adding chlorinating tabs
If you want to keep your swimming pool clean and safe, adding chlorinating tabs to your cleaning guide is an excellent idea. You can buy these in your local home improvement store or pool store. Here are the three main places to put them:
You can add chlorine tablets once weekly as part of your routine pool maintenance. First, check the floater and chlorinator. If you notice that the floater is empty, fill the chlorinator with the appropriate amount of tablets. Generally, one three-inch tablet is enough to cover ten thousand gallons. Alternatively, you can use a handy calculator to estimate how much chlorine your pool requires and which method is most efficient.
Automatic chlorinators can be installed in your pool’s plumbing. The tablets are placed in a container with a knob that controls the rate at which they are dissolved. These chlorinators are not very expensive and can be retrofitted to your existing swimming pool. In line, feeders are not that expensive. Most cost under $100. In line, feeders can be installed in existing pools.
Maintaining a constant level of chlorine
One important aspect of maintaining a consistent chlorine level during pool cleaning is the use of shock water. Shock water contains liquid chlorine and raises the pH level in the pool. Unfortunately, it can also raise the level of alkalinity. Liquid chlorine is especially harmful to the skin. If you accidentally splash it into your eyes, rinse the area with cool water immediately and consult a doctor. Alternatively, you can use lithium-based pool chlorine to avoid these problems.
Shock is a liquid or granular chlorine that should be added to the water every week or so, or even more frequently if the pool is used often. Low levels of chlorine can cause green or hazy water. Adding shock is the first step to clearing your pool’s water. Add the shock in the evening or on a weekend afternoon since the sun will suck the chlorine out faster.
